Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2019)

Triggers Configuration
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 76.13
3. Verify the trigger configuration
To check the configuration of the trigger, use the command:
Example output from this command is shown below:
4. Display the current boot configuration
To display the current boot configuration, use the command:
Example output from this command is shown below:
awplus# show trigger 11
awplus#show trigger 11
Trigger Configuration Details
------------------------------------------------------------
Trigger ..................... 11
Description ................. Load a release file
Type and details ............ USB (in)
Days ........................ smtwtfs
After ....................... 00:00:00
Before ...................... 23:59:59
Active ...................... Yes
Test ........................ No
Trap ........................ Yes
Repeat ...................... Continuous
Modified .................... Wed Sep 15 16:25:33 2010
Number of activations ....... 1
Last activation ............. Wed Sep 15 16:26:49 2010
Number of scripts ........... 1
1. copy.scp
2.
3.
4.
5.
------------------------------------------------------------
awplus# show boot
awplus#show boot
Boot configuration
------------------------------------------------------------
Current software : x310-5.4.4C.rel
Current boot image : flash:/x310-5.4.4C.rel
Backup boot image : flash:/x310-5.4.4C.rel
Default boot config: flash:/default.cfg
Current boot config: flash:/atplab.cfg (file exists)
Backup boot config: flash:/default.cfg (file exists)