Show atmf, Show atmf command on – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1626

AMF Commands
Software Reference for x310 Series Switches
60.38
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show atmf
Displays information about the current AMF node.
Syntax
show atmf [summary|tech|nodes|session
]
Default
Only summary information is displayed.
Mode
User Exec and Privileged Exec
Usage
AMF uses internal VLANs to communicate between nodes about the state of the AMF
network. Two VLANs have been selected specifically for this purpose. Once these have
been assigned, they are reserved for AMF and cannot be used for other purposes
Example-1
To show summary information on AMF node_1 use the following command:
The following figure shows some example output from running this command for a
specific AMF node.
Example-2
To show information specific to AMF nodes use the following command:
Parameter
Description
summary
Displays summary information about the current AMF node.
tech
Displays global AMF information.
nodes
Displays information about AMF network nodes.
session
Displays information on an AMF session.
node_1
show atmf summary
Figure 60-2: Output from the show atmf summary command
node_1#show atmf
ATMF Summary Information:
ATMF Status : Enabled
Network Name : ATMF_NET
Node Name : node_1
Role : Master
Current ATMF Nodes : 8
node_1
show atmf nodes