Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1806)

SNMP Commands
Software Reference for x310 Series Switches
68.24 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
snmp-server location
This command sets the location of the system. The location is:
■ displayed in the output of the show system command
■ stored in the MIB object sysLocation
The no variant of this command removes the configured location from the system.
Syntax snmp-server location <location-name>
no snmp-server location
Mode Global Configuration
Example To set the location to “server room 523”, use the following commands:
Related Commands show snmp-server
show system
snmp-server contact
Parameter Description
<location-name> The location of the system, from 0 to 255 characters long. Valid
characters are any printable character and spaces.
awplus# configure terminal
awplus(config)# snmp-server location server room 523