Vlan (radius server) – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1365

Local RADIUS Server Commands

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

51.37

vlan (RADIUS server)

Use this command to set the VLAN ID or name for the local RADIUS server user group. The
VLAN information is used for authentication with the dynamic VLAN feature.

Use the no variant of this command to clear the VLAN ID or VLAN name for the local
RADIUS server user group.

Syntax

vlan {<vid>|<vlan-name>}

no vlan

Default

VLAN information is not set by default.

Mode

RADIUS Server Group Configuration

Examples

The following commands set VLAN ID 200 to the group named NormalUsers:

The following commands remove VLAN ID 200 from the group named NormalUsers:

Related Commands

group

show radius local-server user

Parameter

Description

<vid>

VLAN ID.

<vlan-name>

VLAN name.

awplus#

configure terminal

awplus(config)#

radius-server local

awplus(config-radsrv)#

group NormalUsers

awplus(config-radsrv-group)#

vlan 200