Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1332)

Local RADIUS Server Commands
Software Reference for x310 Series Switches
51.4 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
To get help for valid RADIUS attribute values for the attribute Service-Type, use the
following commands:
To define the attribute name ‘Service-Type’ with Administrative User (6) to the RADIUS
User Group ‘Admin’, use the following commands:
To delete the attribute ‘Service-Type’ from the RADIUS User Group ‘Admin’, use the
following commands:
Related Commands egress-vlan-id
egress-vlan-name
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# group Admin
awplus(config-radsrv-group)# attribute Service-Type help
Service-Type : integer (Integer number)
Pre-defined values :
Administrative-User (6)
Authenticate-Only (8)
Authorize-Only (17)
Callback-Administrative (11)
Callback-Framed-User (4)
Callback-Login-User (3)
Callback-NAS-Prompt (9)
Call-Check (10)
Framed-User (2)
Login-User (1)
NAS-Prompt-User (7)
Outbound-User (5)
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# group Admin
awplus(config-radsrv-group)# attribute Service-Type 6
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# group Admin
awplus(config-radsrv-group)# no attribute Service-Type