Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1090)

802.1X Commands
Software Reference for x310 Series Switches
41.24 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show dot1x sessionstatistics
This command shows authentication session statistics for the specified interface, which
may be a static channel (or static aggregator) or a dynamic (or LACP) channel group or a
switch port.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show dot1x sessionstatistics [interface <interface-list>]
Mode Privileged Exec
Example See sample output below showing 802.1X (dot1x) authentication session statistics for
port1.0.6
:
Parameter Description
interface Specify a port to show.
The interfaces or ports to configure. An interface-list can be:
■
an interface (e.g. vlan2), a switch port (e.g.
port1.0.6
), a static channel group (e.g. sa2) or a
dynamic (LACP) channel group (e.g. po2)
■
a continuous range of interfaces, ports, static channel
groups or dynamic (LACP) channel groups separated by a
hyphen;
e.g. vlan2-8, or port1.0.1-1.0.4, or sa1-2, or
po1-2
■ a comma-separated list of the above;
e.g. port1.0.1,port1.0.4-1.0.6. Do not mix
interface types in a list
The specified interfaces must exist.
awplus# show dot1x sessionstatistics interface port1.0.6
Authentication session statistics for interface port1.0.6
session user name: manager
session authentication method: Remote server
session time: 19440 secs
session terminat cause: Not terminated yet