Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 84)

CLI Navigation Commands
Software Reference for x310 Series Switches
4.6 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
end
This command returns the prompt to the Privileged Exec command mode from any other
advanced command mode.
Syntax end
Mode All advanced command modes, including Global Configuration and Interface
Configuration modes.
Example The following example shows the use of the end command to return to the Privileged
Exec mode directly from Interface mode.
Related Commands disable (Privileged Exec mode)
enable (Privileged Exec mode)
exit
exit
This command exits the current mode, and returns the prompt to the mode at the
previous level. When used in User Exec mode, the exit command terminates the session.
Syntax exit
Mode All command modes, including Global Configuration and Interface Configuration modes.
Example The following example shows the use of exit command to exit Interface mode, and
return to Configure mode.
Related Commands disable (Privileged Exec mode)
enable (Privileged Exec mode)
end
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# end
awplus#
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# exit
awplus(config)#