Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1728)

Dynamic Host Configuration Protocol (DHCP) Commands
Software Reference for x310 Series Switches
64.30 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ip dhcp pool
This command displays the configuration details and system usage of the DHCP address
pools configured on the device.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show ip dhcp pool [<address-pool>]
Mode User Exec and Privileged Exec
Example
Output Figure 64-6: Example output from the show ip dhcp pool command
Parameter Description
<address-pool>
Name of a specific address pool. This displays the
configuration of the specified address pool only.
awplus# show ip dhcp pool
Pool p1 :
network: 192.168.1.0/24
address ranges:
addr: 192.168.1.10 to 192.168.1.18
static host addresses:
addr: 192.168.1.12 MAC addr: 1111.2222.3333
lease <1:0:0:0>
subnet mask: 255.255.255.0 (pool's network mask)
Probe: Default Values
Status: Enabled [Enabled]
Type: ARP [Ping]
Packets: 2 [5]
Timeout: 200 msecs [200]
Dynamic addresses:
Total: 8
Leased: 2
Utilization: 25.0 %
Static host addresses:
Total: 1
Leased: 1