Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 266)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
8.66 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
terminal monitor
Use this command to display debugging output on a terminal.
To display the cursor after a line of debugging output, press the Enter key.
Use the command terminal no monitor to stop displaying debugging output on the
terminal, or use the timeout option to stop displaying debugging output on the terminal
after a set time.
Syntax terminal monitor [<1-60>]
terminal no monitor
Default Disabled
Mode User Exec and Privileged Exec
Examples To display debugging output on a terminal, enter the command:
To specify timeout of debugging output after 60 seconds, enter the command:
To stop displaying debugging output on the terminal, use the command:
Related Commands All debug commands
undebug all
This command applies the functionality of the no debug all command.
Parameter Description
<1-60> Set a timeout between 1 and 60 seconds for terminal output.
awplus# terminal monitor
awplus# terminal monitor 60
awplus# terminal no monitor