Show ipv6 mld snooping mrouter – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 821

MLD and MLD Snooping Introduction and Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
32.37
show ipv6 mld snooping mrouter
Use this command to display the multicast router interfaces, both configured and learned,
in a VLAN. If you do not specify a VLAN interface then all the VLAN interfaces are displayed.
For information on output options, see
“Controlling “show” Command Output” on
Syntax
show ipv6 mld snooping mrouter [<interface>]
Mode
User Exec and Privileged Exec
Examples
The following command displays the multicast router interfaces in vlan2:
Output
The following command displays the multicast router interfaces for all VLAN interfaces:
Output
Parameter
Description
<interface>
Optional. Specify the name of the VLAN interface. Note: If you do not
specify a single VLAN interface, then all VLAN interfaces are shown.
awplus#
show ipv6 mld snooping mrouter vlan2
awplus#show ipv6 mld snooping mrouter vlan2
VLAN Interface Static/Dynamic
2 port1.0.2 Dynamically Learned
2 port1.0.3 Dynamically Learned
awplus#
show ipv6 mld snooping mrouter
awplus#show ipv6 mld snooping mrouter
VLAN Interface Static/Dynamic
2 port1.0.2 Dynamically Learned
2 port1.0.3 Dynamically Learned
3 port1.0.4 Statically Assigned
3 port1.0.5 Statically Assigned