Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1837

SNMP MIBs

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

69.25

atEnvMonv2TemperatureIndex
{ atEnvMonv2TemperatureEntry 3 }

Numeric identifier of this temperature sensor on its host
board.

atEnvMonv2TemperatureDescription
{ atEnvMonv2TemperatureEntry 4 }

Description of this temperature sensor.

atEnvMonv2TemperatureCurrent
{ atEnvMonv2TemperatureEntry 5 }

Current reading of this temperature sensor in degrees
Celsius.

atEnvMonv2TemperatureUpperThreshold
{ atEnvMonv2TemperatureEntry 6 }

Maximum acceptable reading for this temperature sensor
in degrees Celsius.

atEnvMonv2TemperatureStatus
{ atEnvMonv2TemperatureEntry 7 }

Whether this temperature sensor is currently in an alarm
condition. Can be:

1. outOfRange (1) - means that the current reading is

outside the threshold range.

2. inRange (2) - means that the current reading is

acceptable.

atEnvMonv2PsbObjects
{ atEnvMonv2 4 }

Collection of objects for monitoring power supply bays in
the system and any devices that are installed. It contains
the following objects:

1. atEnvMonv2PsbTable

■

atEnvMonv2PsbSensorTable

atEnvMonv2PsbTable
{ atEnvMonv2PsbObjects 1 }

Table of information about power supply bays in the
system, indexed by:

1. atEnvMonv2PsbHostStackMemberId

2. atEnvMonv2PsbHostBoardIndex
3. atEnvMonv2PsbHostSlotIndex
4. atEnvMonv2PsbHeldBoardIndex
5. atEnvMonv2PsbHeldBoardId
6. atEnvMonv2PsbDescription

atEnvMonv2PsbEntry
{ atEnvMonv2PsbTable 1 }

Description and current status of a single power supply
bay device.

atEnvMonv2PsbHostStackMemberId
{ atEnvMonv2PsbEntry 1 }

Index of the stack member hosting this power supply bay.

atEnvMonv2PsbHostBoardIndex
{ atEnvMonv2PsbEntry 2 }

Index of the board hosting this power supply bay in the
board table.

atEnvMonv2PsbHostSlotIndex
{ atEnvMonv2PsbEntry 3 }

Index of this power supply bay slot on its host board. This
index is fixed for each slot, on each type of board.

atEnvMonv2PsbHeldBoardIndex
{ atEnvMonv2PsbEntry 4 }

Index of a board installed in this power supply bay. This
value corresponds to atEnvMonv2PsbSensorBoardIndex
for each sensor on this board. A value of 0 indicates that a
board is either not present or not supported.

atEnvMonv2PsbHeldBoardId
{ atEnvMonv2PsbEntry 5 }

Type of board installed in this power supply bay. The
values of this object are taken from the pprXxx object IDs
under the boards sub-tree in the parent MIB. A value of 0
indicates that a board is either not present or not
supported.

Table 69-8: Objects defined in AT-ENVMONV2-MIB(cont.)

Object / Object Identifier

Description