Ping ipv6 – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 699
IPv6 Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
27.21
ping ipv6
This command sends a query to another IPv6 host (send Echo Request messages).
Syntax
ping ipv6 {
continuous}] [size <10-1452>] [interface
[timeout <1-65535>]
Mode
User Exec and Privileged Exec
Example
Related Commands
Note
Use of the interface parameter keyword, plus an interface or an interface
range, with this command is only valid when pinging an IPv6 link local address.
Parameter
Description
<ipv6-addr>
The destination IPv6 address. The IPv6 address uses the
format X:X::X:X.
<hostname>
The destination hostname.
repeat
Specify the number of ping packets to send.
<1-2147483647>
Specify repeat count. The default is 5.
size <10-1452>
The number of data bytes to send, excluding the 8 byte ICMP
header. The default is 56 (64 ICMP data bytes).
interface
The interface or range of configured IP interfaces to use as the
source in the IP header of the ping packet.
timeout
<1-65535>
The time in seconds to wait for echo replies if the ARP entry is
present, before reporting that no reply was received. If no ARP
entry is present, it does not wait.
repeat
Specify the number of ping packets to send.
<1-2147483647>
Specify repeat count. The default is 5.
continuous
Continuous ping.
size <10-1452>
The number of data bytes to send, excluding the 8 byte ICMP
header. The default is 56 (64 ICMP data bytes).
timeout
<1-65535>
The time in seconds to wait for echo replies if the ARP entry is
present, before reporting that no reply was received. If no ARP
entry is present, it does not wait.
awplus#
ping ipv6 2001:0db8::a2