Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 246)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
8.46 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show system
This command displays general system information about the device, including the
hardware installed, memory, and software versions loaded. It also displays location and
contact details when these have been set.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show system
Mode User Exec and Privileged Exec
Example To display configuration information, use the command:
Usage For a stacked configuration, if this command is entered on the stack master, it will display
the information for all the stack members. A stack member heading will be displayed to
distinguish the different information for every stack member.
Output Figure 8-17: Example output from the show system command
Related Commands show system environment
awplus# show system
x310#show system
Stack System Status Thu May 29 02:40:53 2014
Stack member 1
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 392 x310-26FT X1-0 A04939H131100021
--------------------------------------------------------------------------------
RAM: Total: 494848 kB Free: 396052 kB
Flash: 62.0MB Used: 45.4MB Available: 16.6MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime : 0 days 00:40:53
Bootloader version : 3.0.3
Current software : x310-5.4.4C.rel
Software version : 5.4.4C-0.1
Build date : Thu May 29 01:32:39 NZST 2014
Current boot config: flash:/default.cfg (file exists)
System Name
x310
System Contact
System Location
x310#