Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 44)

Getting Started
Software Reference for x310 Series Switches
1.20 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
How to See System Information
This section describes how to view the following system information:
■ overview information
■ details of temperature and voltage
■ serial number
Viewing Overall System Information
To display an overview of the switch hardware, software, and system settings, enter User
Exec or Privileged Exec mode and enter the command:
The output looks like this:
Viewing Temperature, Voltage, and Fan Status
The switch monitors the environmental status of the switch and its power supplies and
fan. To display this information, enter User Exec or Privileged Exec mode and enter the
command:
awplus# show system
x310#show system
Stack System Status Thu May 29 02:02:30 2014
Stack member 1
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 392 x310-26FT X1-0 A04939H131100021
--------------------------------------------------------------------------------
RAM: Total: 494848 kB Free: 399396 kB
Flash: 62.0MB Used: 45.4MB Available: 16.6MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime : 0 days 00:02:30
Bootloader version : 3.0.3-devel
Current software : x310-5.4.4C.rel
Software version : 5.4.4C-0.1
Build date : Thu May 29 01:32:39 NZST 2014
Current boot config: flash:/default.cfg (file exists)
System Name
x310
System Contact
System Location
x310#
awplus# show system environment