Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1465)

DHCP Snooping Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 56.27
show arp security interface
Use this command to display ARP security configuration for the specified ports or all ports.
Syntax show arp security interface [<port-list>]
Mode User Exec and Privileged Exec
Example To display ARP security configuration for ports, use the command:
Related Commands arp security violation
show arp security
show arp security statistics
Parameter Description
<port-list> The ports to display ARP security information about. The port list can
include switch ports, and static or dynamic aggregated links.
awplus# show arp security interface
Figure 56-2: Example output from the show arp security interface command
awplus#show arp security interface
Arp Security Port Status and Configuration:
Port: Provisioned ports marked with brackets, e.g. (portx.y.z)
KEY: LG = Log
TR = Trap
LD = Link down
Port Action
-------------------------------
port1.0.1 -- -- --
port1.0.2 -- -- --
port1.0.3 LG TR LD
port1.0.4 LG -- --
port1.0.5 LG -- --
port1.0.6 LG TR --
port1.0.7 LG -- LD
...
Table 56-2: Parameters in the output from the show arp security interface command
Parameter Description
Action The action the switch takes when it detects an ARP security violation
on the port.
Port The port. Parentheses indicate that ports are configured for
provisioning.
LG, Log Generate a log message
TR, Trap Generate an SNMP notification (trap).
LD, Link
down Shut down the link.