Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1082)

802.1X Commands
Software Reference for x310 Series Switches
41.16 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show dot1x
This command shows authentication information for dot1x (802.1X) port authentication.
If you specify the optional all parameter then this command also displays all
authentication information for each port available on the switch.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show dot1x [all]
Mode Privileged Exec
Example
Parameter Description
all Displays all authentication information for each port available on the
switch.
awplus# show dot1x all
Table 41-1: Example output from the show dot1x command
awplus# show dot1x all
802.1X Port-Based Authentication Enabled
RADIUS server address: 150.87.18.89:1812
Next radius message id: 5
RADIUS client address: not configured
Authentication info for interface port1.0.6
portEnabled: true - portControl: Auto
portStatus: Authorized
reAuthenticate: disabled
reAuthPeriod: 3600
PAE: quietPeriod: 60 - maxReauthReq: 2 - txPeriod: 30
PAE: connectTimeout: 30
BE: suppTimeout: 30 - serverTimeout: 30
CD: adminControlledDirections: in
KT: keyTxEnabled: false
critical: disabled
guestVlan: disabled
dynamicVlanCreation: single-dynamic-vlan
assignFailActionRule: deny
hostMode: multi-supplicant
maxSupplicant: 1024
dot1x: enabled
protocolVersion: 1
authMac: enabled
method: PAP
reauthRelearning: disabled
authWeb: enabled
method: PAP
lockCount: 3
packetForwarding: disabled
twoStepAuthentication:
configured: enabled
actual: enabled
SupplicantMac: none