Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1302)

TACACS+ Commands
Software Reference for x310 Series Switches
49.6 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show tacacs+
This command displays the current TACACS+ server configuration and status.
Syntax show tacacs+
Mode User Exec and Privileged Exec
Example To display the current status of TACACS+ servers, use the command:
Output Figure 49-1: Example output from the show tacacs+ command
Table 49-1: Parameters in the output of the show tacacs+ command
awplus# show tacacs+
TACACS+ Global Configuration
Timeout : 5 sec
Server Host/ Server
IP Address Status
------------------------------------------------------------
192.168.1.10 Alive
192.168.1.11 Unknown
Output Parameter Meaning
Timeout A time interval in seconds.
Server Host/IP Address TACACS+ server hostname or IP address.
Server Status The status of the authentication port.
Alive The server is alive.
Dead The server has timed out.
Error The server is not responding or
there is an error in the key string
entered.
Unknown The server is never used or the
status is unkown.
Unreachable The server is unreachable.
Unresolved The server name can not be
resolved.