Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 435)

VLAN Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 17.7
show vlan
Use this command to display information about a particular VLAN by specifying the VLAN
ID. It displays information for all the VLANs configured.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show vlan {all|brief|dynamic|static|auto|static-ports<1-4094>}
Mode User Exec and Privileged Exec
Example To display information about VLAN 2, use the command:
Output Figure 17-2: Example output from the show vlan command
Related Commands vlan
Parameter Description
<1-4094> Display information about the VLAN specified by the VLAN ID.
all Display information about all VLANs on the device.
brief Display information about all VLANs on the device.
dynamic Display information about all VLANs learned dynamically.
static Display information about all statically configured VLANs.
auto Display information about all auto-configured VLANs.
static-
ports Display static egress/forbidden ports.
awplus# show vlan 2
VLAN ID Name Type State Member ports
(u)-Untagged, (t)-Tagged
======= ================ ======= ======= ====================================
2 VLAN0002 STATIC ACTIVE port1.0.3(u) port1.0.4(u) port1.0.5(u)
port1.0.6(u)
.
.