Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 428)

VLAN Introduction
Software Reference for x310 Series Switches
16.16 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Table 16-4: Configuration procedure for Switch A
Command Description
Create the VLANs 100 and 101
awplus#
configure terminal Enter Global Configuration mode.
awplus(config)#
vlan database Enter VLAN Configuration mode.
awplus(config-vlan)#
vlan 100,101 Create the VLANs.
awplus(config-vlan)#
exit Exit VLAN Configuration mode.
Create two protocol type based VLAN classifier rules for IPv4 and IPv6 mapped to VLAN 100 and 101
awplus(config)#
vlan classifier rule 1 proto ip encap
ethv2 vlan 100
Create a VLAN classifier rule 1 for IPv4 packets
on VLAN 100.
awplus(config)#
vlan classifier rule 2 proto ipv6 encap
ethv2 vlan 101
Create a VLAN classifier rule 2 for IPv6 packets
on VLAN 101.
Create a group of VLAN classifier rules and map the defined VLAN classifier rules 1 and 2 to the group
awplus(config)#
vlan classifier group 1 add rule 1 Add VLAN classifier rule 1 to VLAN classifier
group 1.
awplus(config)#
vlan classifier group 1 add rule 2 Add VLAN classifier rule 2 to VLAN classifier
group 1.