Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1788)

SNMP Commands
Software Reference for x310 Series Switches
68.6 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show debugging snmp
This command displays whether SNMP debugging is enabled or disabled.
Syntax show debugging snmp
Mode User Exec and Privileged Exec
Example To display the status of SNMP debugging, use the command:
Output Figure 68-2: Example output from the show debugging snmp command
Related Commands debug snmp
show running-config snmp
This command displays the current configuration of SNMP on your device.
Syntax show running-config snmp
Mode Privileged Exec
Example To display the current configuration of SNMP on your device, use the command:
Output Figure 68-3: Example output from the show running-config snmp command
Related Commands show snmp-server
awplus# show debugging snmp
Snmp (SMUX) debugging status:
Snmp debugging is on
awplus# show running-config snmp
snmp-server contact AlliedTelesis
snmp-server location Philippines
snmp-server group grou1 auth read view1 write view1 notify view1
snmp-server view view1 1 included
snmp-server community public
snmp-server user user1 group1 auth md5 password priv des
password