Aaa accounting login, Accounting, Accounting login – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1232
AAA Commands
Software Reference for x310 Series Switches
45.10
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
aaa accounting login
This command configures RADIUS and TACACS+ accounting for login shell sessions. The
specified method list name can be used by the accounting login command in the Line
Configuration mode. If the default parameter is specified, then this creates a default
method list that is applied to every console and vty line, unless another accounting
method list is applied on that line.
Note that unlimited RADIUS servers and up to four TACACS+ servers can be configured
and consulted for accounting. The first server configured is regarded as the primary server
and if the primary server fails then the backup servers are consulted in turn. A backup
server is consulted if the primary server fails, i.e is unreachable.
Use the no variant of this command to remove an accounting method list for login shell
sessions configured by an aaa accounting login command. If the method list being
deleted is already applied to a console or vty line, accounting on that line will be disabled.
If the default method list name is removed by this command, it will disable accounting on
every line that has the default accounting configuration.
Syntax
aaa accounting login {default|<list-name>}
{start-stop|stop-only|none} {group {radius|tacacs+|<group-name>}}
no aaa accounting login {default|<list-name>}
Default
Accounting for login shell sessions is disabled by default.
Mode
Global Configuration
Usage
This command enables you to define a named accounting method list. The items that you
define in the accounting options are:
■
the types of accounting packets that will be sent
■
the set of servers to which the accounting packets will be sent
Parameter
Description
default
Default accounting method list.
<list-name>
Named accounting method list.
start-stop
Start and stop records to be sent.
stop-only
Stop records to be sent.
none
No accounting record to be sent.
group
Specify the servers or server group where accounting packets are
sent.
radius
Use all RADIUS servers configured by the
.
tacacs+
Use all TACACS+ servers configured by the
command.
<group-name>
Use the specified RADIUS server group, as configured by the