Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 741)

IGMP Snooping Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 31.3
clear ip igmp group
Use this command to clear IGMP group membership records for a specific group on either
all VLAN interfaces, a single VLAN interface, or for a range of VLAN interfaces.
Syntax clear ip igmp group *
clear ip igmp group <interface>
Mode Privileged Exec
Usage This command applies to VLAN interfaces configured for IGMP or IGMP Snooping.
In addition to the group a VLAN interface can be specified. Specifying this will mean that
only entries with the group learned on the interface will be deleted.
Examples
Validation
Commands
show ip igmp interface
show running-config
Related Commands clear ip igmp
clear ip igmp interface
Parameter Description
*
Clears all groups on all VLAN interfaces. This is an alias to the
clear ip igmp command.
Specifies the group whose membership records will be cleared
from all VLAN interfaces, entered in the form A.B.C.D.
<interface>
Specifies the name of the VLAN interface; all groups learned on
this VLAN interface are deleted.
awplus# clear ip igmp group *
awplus# clear ip igmp group 224.1.1.1 vlan1