Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 331)

Interface Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 12.11
show interface brief
Use this command to display brief interface, configuration, and status information,
including provisioning information.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show interface brief
Mode User Exec and Privileged Exec
Output Figure 12-4: Example output from the show interface brief command
Table 12-1: Parameters in the output of the show interface brief command
Related Commands show interface
show interface memory
awplus#show int brief
Interface Status Protocol
port1.0.1 admin up down
port1.0.2 admin up down
port1.0.3 admin up down
port1.0.4 admin up down
port1.0.5 admin up down
port1.0.6 admin up running
lo admin up running
vlan1 admin up down
vlan2 admin up down
Parameter Description
Interface The name or type of interface.
Status The administrative state. This can be either admin up or admin down
Protocol The link state. This can be either down, running, or provisioned