Upgrade software and configuration files – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1780
SNMP Introduction
Software Reference for x310 Series Switches
67.22
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
Upgrade Software and Configuration Files
Use this procedure to upgrade to a new software version and boot configuration file. For
detailed descriptions of the MIB objects used in this procedure, and other MIB objects for
managing software installation and configuration files, see
Table 67-6: Procedure for upgrading to a new software version and boot configuration
Do this ...
By reading or
setting this MIB
object ...
Whose object ID is ...
To this value ...
1.
Check that you have
enough flash memory
for the currently running
software file, the new
software version file,
and any configuration
scripts required.
2.
Check the version and
name of the software
currently running.
currSoftVersion
currSoftName
1.3.6.1.4.1.207.8.4.4.4.500.2.1.1
1.3.6.1.4.1.207.8.4.4.4.500.2.1.2
Read:
<software-name>
3.
If you do not already
have the currently
running software as a
software version file in
flash, save the currently
running software with a
file name to the flash
root.
currSoftSaveToFile
1.3.6.1.4.1.207.8.4.4.4.500.2.1.4
Set:
<backup-filename.rel>
4.
Check that the file saved
successfully. (The most
common failures result
from lack of flash
memory space.)
currSoftSaveStatus
1.3.6.1.4.1.207.8.4.4.4.500.2.1.5
Read:
■
1 (idle) - there is no release
file save operation in
progress
■
2 (success) - the last release
file save operation
completed successfully
■
3 (failure) - the last release
file save operation failed
■
4 (saving) - a release file
save operation is currently
in progress
5.
Copy the new software
version file to flash
memory on the device
See
.
6.
Set the new release file
to be the current release
that the device will
install and run the next
time it restarts. Include
the path.
nextBootPath
1.3.6.1.4.1.207.8.4.4.4.500.2.2.2
Set:
<next-filename>
e.g.:
flash:/release.rel
7.
Check the version of
release file set to install
next.
nextBootVersion
1.3.6.1.4.1.207.8.4.4.4.500.2.2.1
Read: