Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 439)

VLAN Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 17.11
show vlan classifier rule
Use this command to display information about all configured VLAN classifier rules or a
specific rule.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show vlan classifier rule [<1-256>]
Mode User Exec and Privileged Exec
Usage If a rule ID is not specified, all configured VLAN classifier rules are shown. If a rule ID is
specified, a specific configured VLAN classifier rule is shown.
Example To display information about VLAN classifier rule 1, enter the command:
Output Figure 17-6: Example output from the show vlan classifier rule 1 command
Related Commands vlan classifier activate
vlan classifier rule ipv4
vlan classifier rule proto
Parameter Description
<1-256> VLAN classifier rule identifier
awplus# show vlan classifier rule 1
vlan classifier group 1 add rule 1