Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1929)

LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 71.3
clear lldp table
This command clears the table of LLDP information received from neighbors through
specified ports. If no port list is supplied, neighbor information is cleared for all ports.
Syntax clear lldp table [interface >]
Mode Privileged Exec
Examples To clear the table of neighbor information received on ports 1.0.1 and 1.0.6, use the
command:
To clear the entire table of neighbor information received through all ports, use the
command:
Related Commands show lldp neighbors
Parameter Description
The ports for which the neighbor information table is to be cleared.
awplus# clear lldp table interface port1.0.1,port1.0.6
awplus# clear lldp table