Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1530)

EPSR Commands
Software Reference for x310 Series Switches
58.4 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
epsr datavlan
This command adds a data VLAN or a range of VLAN identifiers to a specified EPSR
instance.
The no variant of this command removes a data vlan or data vlan range from an EPSR
instance.
Syntax epsr datavlan {<vlanid>|<vlanid-range>}
no epsr datavlan {<vlanid>|<vlanid-range>}
Mode EPSR Configuration
Usage We suggest setting the epsr controlvlan to vlan2 using the epsr mode master
controlvlan primaryport and epsr mode transit controlvlan commands, then setting
the EPSR data VLAN between to be a value 3 and 4094 using the epsr datavlan command.
Examples To add vlan3 to the EPSR instance called blue, use the command:
To add vlan2 and vlan3 to the EPSR instance called blue, use the command:
To remove vlan3 from the EPSR instance called blue, use the command:
To remove vlan2 and vlan3 from the EPSR instance called blue, use the command:
Related Commands epsr mode master controlvlan primaryport
epsr mode transit controlvlan
show epsr
Parameter Description
Name of the EPSR instance.
datavlan Adds a data VLAN to be protected by the EPSR instance.
<vlanid> The VLAN’s VID - a number between 1 and 4094 excluding
the number selected for the control VLAN.
<vlanid-range> Specify a range of VLAN identifiers using a hyphen to
separate identifiers.
awplus(config-epsr)# epsr blue datavlan vlan3
awplus(config-epsr)# epsr blue datavlan vlan2-vlan3
awplus(config-epsr)# no epsr blue datavlan vlan3
awplus(config-epsr)# no epsr blue datavlan vlan2-vlan3