Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 277)

Logging Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 10.5
default log email
This command restores the default settings for log messages sent to an email address. By
default no filters are defined for email addresses. Filters must be defined before messages
will be sent. This command also restores the remote syslog server time offset value to local
(no offset).
Syntax default log email >
Mode Global Configuration
Example To restore the default settings for log messages sent to the email address
[email protected]
use the following commands:
Related Commands show log config
default log host
This command restores the default settings for log sent to a remote syslog server. By
default no filters are defined for remote syslog servers. Filters must be defined before
messages will be sent. This command also restores the remote syslog server time offset
value to local (no offset).
Syntax default log host <ip-addr>
Mode Global Configuration
Example To restore the default settings for messages sent to the remote syslog server with IP
address 10.32.16.21 use the following commands:
Validation
Commands
show log config
Related Commands log email
Parameter Description
The email address to send log messages to
awplus# configure terminal
awplus(config)# default log email [email protected]
Parameter Description
<ip-addr>
The IP address of a remote syslog server
awplus# configure terminal
awplus(config)# default log host 10.32.16.21