Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 987)

976 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
Usage Guidelines:
Defines non standard DHCP option codes (0-254)
NOTE
An option name in ASCII format accepts a backslash (\) as an input, but is not displayed in the output
(Use
show runnig config
to view the output). Use a double backslash to represent a single
backslash.
Example
rfs7000-37FABE(config-dhcp-policy-test)#option option1 200 ascii
rfs7000-37FABE(config-dhcp-policy-test)#show context
dhcp-server-policy test
option option1 200 ascii
rfs7000-37FABE(config-dhcp-policy-test)#
Related Commands:
ping
dhcp-server-policy
Configures the DHCP server’s ping timeout interval. The controller uses the timeout to
intermittently ping and discover whether a client requested IP address is available or in use.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
ping timeout <1-10>
Parameters
ping timeout <1-10>
Example
rfs7000-37FABE(config-dhcp-policy-test)#ping timeout 2
rfs7000-37FABE(config-dhcp-policy-test)#show context
dhcp-server-policy test
hexstring Configures the DHCP option as a hexadecimal string
ip Configures the DHCP option as an IP address
no Removes DHCP server options
timeout <1-10> Sets the ping timeout from 1 - 10 seconds. The default is 1 second.