Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 704)

Brocade Mobility RFS Controller CLI Reference Guide 691
53-1003098-01
7
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands:
antenna-diversity
interface-config-radio-instance
Configures transmit antenna diversity for non-11n transmit rates
Antenna diversity uses two or more antennas to increase signal quality and strength. This option is
disabled by default.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
Syntax:
antenna-diversity
Parameters
None
Example
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#antenna-diversity
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
aggregation ampdu tx-only
aeroscout forward
antenna-diversity
airtime-fairness prefer-ht weight 6
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands:
antenna-downtilt
interface-config-radio-instance
Enables the Advanced Element Panel Technology (ADEPT) antenna mode. The ADEPT mode
increases the probability of parallel data paths enabling multiple spatial data streams. This option
is disabled by default.
Supported in the following platforms:
• Access Point — Brocade Mobility 71XX Access Point
NOTE
This feature is not supported on Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access
Point, and Brocade Mobility 1220 Access Point.
no Disables fair access for wireless clients (provides access on a round-robin mode)
no Uses single antenna for non-11n transmit rates