Boot – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 452
438
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
POLICY SLNO NAME TRIGGER-S TRIGGER-U
TRIGGER-N MITIGATION
-----------------------------------------------------------------------------
-----------------------
test 1 essid-jack-attack-detected N N N
-
test 2 unauthorized-bridge N N N
-
test 3 wlan-jack-attack-detected N N N
-
test 4 multicast-igrp-routers-detection N N N
-
test 5 multicast-igmp-detection N N N
-
test 6 dos-eapol-logoff-storm N N N
-
test 7 probe-response-flood N N N
-
test 8 monkey-jack-attack-detected N N N
-
test 9 dos-rts-flood N N
--More--
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show advanced-wips configuration events thresholds
-----------------------------------------------------------------------------
---
POLICY # EVENT THRESHOLD VALUE
-----------------------------------------------------------------------------
---
test 1 dos-eapol-logoff-storm eapol-start-frames-br 10
test 2 dos-eapol-logoff-storm eapol-start-frames-mu 5
test 3 probe-response-flood probe-rsp-frames-count 50
test 4 dos-cts-flood cts-frames-ratio 70
test 5 dos-cts-flood mu-rx-cts-frames 20
- - - - -
-----------------------------------------------------------------------------
---
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show advanced-wips stats detected-aps
Number of APs: 0
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show advanced-wips stats client-table
Number of clients: 2
rfs7000-37FABE(config)#
boot
Displays a device’s boot configuration. Use this command to view the primary and secondary image
details, such as Build Date, Install Date, and Version. This command also displays the current boot
and next boot information.
Supported in the following platforms: