Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1085)

Brocade Mobility RFS Controller CLI Reference Guide 1077
53-1003098-01
18
Example
rfs7000-37FABE(config-radio-qos-test)#admission-control best-effort
max-clients 200
rfs7000-37FABE(config-radio-qos-test)#admission-control voice
reserved-for-roam-percent 8
rfs7000-37FABE(config-radio-qos-test)#admission-control voice
max-airtime-percent 9
rfs7000-37FABE(config-radio-qos-test)#show context
radio-qos-policy test
admission-control voice max-airtime-percent 9
admission-control voice reserved-for-roam-percent 8
admission-control best-effort max-clients 200
accelerated-multicast stream-threshold 15
accelerated-multicast client-timeout 500
rfs7000-37FABE(config-radio-qos-test)#
Related Commands:
no
radio-qos-policy
max-roamed-clients
<0-256> Optional. Specifies the maximum number of roaming wireless clients admitted to the selected access
category
•
background – Sets the number of low (background) supported wireless clients allowed to roam to a
different access point radio
•
best-effort – Sets the number of normal (best-effort) supported wireless clients allowed to roam to a
different access point radio
•
video – Sets the number of video supported wireless clients allowed to roam to a different access
point radio
•
voice – Sets the number of voice supported wireless clients allowed to roam to a different access
point radio
The following keyword is common to all of the above traffic types:
•
<0-256> – Specify a value from 0 - 256. This is the maximum number of roaming wireless clients
admitted to the selected access category. The default is 10 roamed clients.
reserved-for-roam-percent
<0-150> Optional. Calculates the percentage of air time, including oversubscription, allocated exclusively for
roaming clients. This value is calculated relative to the configured max air time for this access category.
•
background – Sets the roam utilization (in the form of a percentage of the radio’s bandwidth)
allotted to admission control for low (background) supported clients who have roamed to a different
radio.
•
best-effort – Sets the roam utilization (in the form of a percentage of the radio’s bandwidth) allotted
to admission control for normal (best-effort) supported clients who have roamed to a different radio.
•
video – Sets the roam utilization (in the form of a percentage of the radio’s bandwidth) allotted to
admission control for video supported clients who have roamed to a different radio.
•
voice – Sets the roam utilization (in the form of a percentage of the radio’s bandwidth) allotted to
admission control for voice supported clients who have roamed to a different radio.
The following keyword is common to all of the above traffic types:
•
<0-150> – Specify a value from 0 - 150. This is the percentage of air time, including
oversubscription, allocated exclusively for roaming clients associated with the selected
access category. The default is 10%.
no Reverts or resets admission control settings to their default