Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 237)

Brocade Mobility RFS Controller CLI Reference Guide 221
53-1003098-01
4
customize show-wireless-radio (adopt-to,br-name <1-64>,channel,location
<1-64>,
num-clients,power,radio-alias <3-67>,radio-id,radio-mac,rf-mode,state)
customize show-wireless-radio-stats (radio-alias <3-67>,radio-id,radio-mac,
rx-bytes,rx-errors,rx-packets,rx-throughput,tx-bytes,tx-dropped,tx-packets,
tx-throughput)
average-retry-number Includes the average-retry-number column, which displays the average number of retransmissions made per
packet.
error-rate Includes the error-rate column
neighbor-hostname
<1-64> Includes the neighbor-hostname, which displays reported neighbor’s hostname
•
<1-64> – Sets the neighbor-hostname column width from 1 - 64 characters
noise Includes the noise column, which displays the noise level in dBm
q-index Includes the q-index column, which displays the q-index
rx-rate Includes the rx-rate column, which displays rate of receiving
signal Includes the signal column, which displays the signal strength in dBM
snr Includes the snr column, which displays the signal-to-noise ratio
t-index Includes the t-index column, which displays t-index
tx-rate Includes the tx-rate column, which displays rate of transmission
show-wireless-radio Customizes the show wireless radio command output
adopt-to Includes the adopt-to column, which displays information about the wireless controller adopting this AP
br-name <1-64> Includes the br-name column, which displays information about the AP this radio belongs
•
<1-64> – Sets the br-name column width from 1 - 64 characters
channel Includes the channel column, which displays information about the configured and current channel for this
radio
location <1-64> Includes the location column, which displays the location of the AP this radio belongs
•
<1-64> – Sets the location column width from 1 - 64 characters
num-clients Includes the num-clients column, which displays the number of clients associated with this radio
power Includes the power column, which displays the radio’s configured and current transmit power
radio-alias <3-67> Includes the radio-alias column, which displays the radio’s alias (combination of AP's hostname and radio
interface number in the “HOSTNAME:RX” formate)
•
<3-67> – Sets the radio-alias column width from 3 - 67 characters
radio-id Includes the radio-id column, which displays the radio‘s ID (combination of AP’s MAC address and radio
interface number in the “AA-BB-CC-DD-EE-FF:RX” format)
radio-mac Includes the radio-mac column, which displays the radio’s base MAC address
rf-mode Includes the rf-mode column, which displays the radio’s operating mode. The radio mode can be 2.4 GHz,
5.0 GHz, or sensor.
state Includes the state column, which displays the radio’s current operational state
show-wireless-radio-stats Customizes the show wireless radio statistics command output
radio-alias <3-67> Includes the radio-alias column, which displays the radio’s alias (combination of AP's hostname and radio
interface number in the “HOSTNAME:RX” format)
•
<3-67> – Sets the radio-alias column width from 3 - 67 characters
radio-id Includes the radio-id column, which displays the radio‘s ID (combination of AP’s MAC address and radio
interface number in the “AA-BB-CC-DD-EE-FF:RX” format)