Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 566)

Brocade Mobility RFS Controller CLI Reference Guide 553
53-1003098-01
7
arp timeout <15-86400>
Example
rfs7000-37FABE(config-profile-default-rfs7000)#arp timeout 2000
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
bridge vlan 1
bridging-mode isolated-tunnel
ip igmp snooping
ip igmp snooping querier
arp timeout 2000
crypto ikev1 policy ikev1-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ikev2 policy ikev2-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
crypto ikev1 remote-vpn
crypto ikev2 remote-vpn
crypto auto-ipsec-secure
interface me1
interface ge1
ip dhcp trust
qos trust dscp
qos trust 802.1p
interface ge2
ip dhcp trust
--More--
rfs7000-37FABE(config-profile-default-rfs7000)#
Related Commands:
auto-learn-staging-config
Profile Config Commands
Enables automatic recognition of devices pending adoption
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
serial <1-4>
<1-1> <1-1> Configures the static ARP entry for serial interface
•
<1-4> – Specify the Slot ID
•
<1-1> – Specify the port ID.
•
<1-1> – Specify the Channel group ID.
{dhcp-server|router} The following keywords are common to all off the above interface types:
•
dhcp-server – Optional. Sets ARP entries for a DHCP server
•
router – Optional. Sets ARP entries for a router
arp timeout
<15-86400> Sets ARP entry timeout
•
– Sets the ARP entry timeout in seconds. Specify a value from 15 - 86400 seconds.
no Removes an entry from the ARP cache