Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1322)

1314 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
28
domain-name TechPubs
hessid 00-23-68-88-0D-A7
ip-address-type ipv6 available
3gpp mcc 310 mnc 970
3gpp mcc 505 mnc 14
rfs4000-229D58(config-passpoint-policy-test)#
Related Commands:
nai-realm
passpoint-policy
A Network Access Identifier (NAI) realm element in the passpoint policy identifies a hotspot service
provider by the unique NAI realm name.
The following table lists NAI realm configuration mode commands.
nai-realm
nai-realm
Configures a NAI realm name and enters its configuration mode. The NAI realm name identifies the
accessible hotspot service providers. You can configure a list of NAI realm names of service
providers operating within a specific hotpsot zone.This NAI realm name list is presented in ANQP
response to a NAI realm and NAI home realm query
The configured NAI realm name list is presented in ANQP response to a NAI realm and NAI home
realm query.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
Syntax:
nai-realm
Parameters
nai-realm
no Removes the IP address type configured for this passpoint policy
Command Description Reference
nai-realm Creates a NAI realm name for this hotspot and enters its configuration mode page 1314
nai-realm-config-mode
commands Invokes the NAI realm configuration mode commands page 1315
nai-realm
E> Configures the NAI realm name for this passpoint policy
•
– Specify the NAI realm name for this passpoint policy.