Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 717)

704 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Example
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#extended-range
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
description Primary\ radio\ to\ use
channel 1
data-rates b-only
beacon period 50
beacon dtim-period bss 1 5
beacon dtim-period bss 2 2
beacon dtim-period bss 3 5
beacon dtim-period bss 4 5
beacon dtim-period bss 5 5
beacon dtim-period bss 6 5
beacon dtim-period bss 7 5
beacon dtim-period bss 8 5
beacon dtim-period bss 9 5
beacon dtim-period bss 10 5
beacon dtim-period bss 11 5
beacon dtim-period bss 12 5
beacon dtim-period bss 13 5
beacon dtim-period bss 14 5
beacon dtim-period bss 15 5
beacon dtim-period bss 16 5
antenna-gain 12.0
aggregation ampdu tx-only
aeroscout forward
ekahau forward ip 172.16.10.1 port 3
antenna-mode 2x2
antenna-diversity
airtime-fairness prefer-ht weight 6
extended-range 15
--More--
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands:
guard-interval
interface-config-radio-instance
Configures the 802.11n guard interval. A guard interval ensures distinct transmissions do not
interfere with one another. It provides immunity to propagation delays, echoes and reflection of
radio signals.
The guard interval is the space between transmitted characters. The guard interval eliminates inter
symbol interference (ISI). ISI which occurs when echoes or reflections from one symbol interferes
with another. Adding time between transmissions allows echoes and reflections to settle before the
next symbol is transmitted. A shorter guard interval results in shorter symbol times, which reduces
overhead and increases data rates by up to 10%.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
no Resets the extended range to default (7 km for 2.4 GHz and 5 km for 5.0 GHz)