Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 613)

600 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
dpd-keepalive 11
dpd-retries 10
lifetime 655
isakmp-proposal default encryption aes-256 group 2 hash sha
isakmp-proposal testpraposal encryption aes group 2 hash sha
mode aggressive
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#
no
crypto-ikev1/ikev2-policy commands
Negates a command or set its defaults
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no [dpd-keepalive|dpd-retries|isakmp-proposal|lifetime|mode]
Parameters
no [dpd-keepalive|dpd-retries|isakmp-proposal|lifetime|mode]
Example
The following example shows the IKEV1 Policy settings before the ‘no’ commands
are executed:
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#show
context
crypto ikev1 policy testpolicy
dpd-keepalive 11
dpd-retries 10
lifetime 655
isakmp-proposal default encryption aes-256 group 2 hash sha
isakmp-proposal testpraposal encryption aes group 2 hash sha
mode aggressive
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#no
mode
rfs7000-37FABE(config-profile-default-rfs7000-ikev1-policy-testpolicy)#no
dpd-keepalive
dpd-keepalive Resets the DPD keepalive interval to default
dpd-retries Resets the DPD keepalive retries count to default (applicable only to the IKEv1 policy)
isakmp-proposal Removes the configured ISAKMP proposal
lifetime Resets the ISAKMP security association lifetime
mode Resets the tunnelling mode to default (main mode) (applicable only to the IKEv1 policy)