Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 850)

Brocade Mobility RFS Controller CLI Reference Guide 837
53-1003098-01
8
attribute chargeable-user-identity
attribute cisco-vsa audit-session-id
attribute framed-mtu <100-1500>
attribute location-information [include-always|none|server-requested]
attribute nas-ipv6-address
attribute operator-name
attribute service-type [framed|login]
Parameters
attribute acct-delay-time
attribute acct-multi-session-id
attribute chargeable-user-identity
attribute cisco-vsa audit-session-id
attribute framed-mtu <100-1500>
attribute location-information [include-always|none|server-requested]
acct-delay-time Enables support for accounting-delay-time attribute in accounting requests. When enabled, this attribute
indicates the number of seconds the client has been trying to send a request to the accounting server. By
subtracting this value from the time the packet is received by the server, the system is able to calculate
the time of a request-generating event. Note, the network transit time is ignored.
Including the acct-delay-time attribute in accounting requests updates the acct-delay-time value
whenever the packet is retransmitted, This changes the content of the attributes field, requiring a new
identifier and request authenticator.
acct-multi-session-id Enables support for accounting-multi-session-id attribute. When enabled, it allows linking of multiple
related sessions of a roaming client. This option is useful in scenarios where a client roaming between
access points sends multiple RADIUS accounting requests to different access points.
chargeable-user-identity Enables support for chargeable-user-identity attribute
cisco-vsa
audit-session-id Configures the CISCO Vendor Specific Attribute (VSA) attribute included in access requests. This feature s
disabled by default.
This VSA allows CISCO’s Identity Services Engine (ISE) to validate a requesting client’s network
compliance, such as the validity of virus definition files (antivirus software or definition files for an
anti-spyware software application).
•
audit-session-id – Includes the audit session ID attribute in access requests
The audit session ID is included in access requests when Cisco ISE is configured as an authentication
server.
NOTE: If the Cisco VSA attribute is enabled, configure an additional UDP port to listen for dynamic
authorization messages from the Cisco ISE server. For more information, see service .
framed-mtu <100-1500> Configures Framed-MTU attribute used in access requests
•
<100-1500> – Specify the Framed-MTU attribute from 100 - 1500.
location-information
[include-always|
none|server-requested] Enables/disables support for RFC5580 location information attribute, based on the option selected. The
various options are:
•
include-always – Always includes location information in RADIUS authentication and accounting
messages
•
none – Disables sending of location information in RADIUS authentication and accounting
messages
•
server-requested – Includes location information in RADIUS authentication and accounting
messages only when requested by the server
When enabled, location information is exchanged in authentication and accounting messages.