Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 379)

Brocade Mobility RFS Controller CLI Reference Guide 363
53-1003098-01
4
wireless-client [count-per-radio <0-256>|cred-cache-ageout <60-86400>|
hold-time <1-86400>|inactivity-timeout
<60-86400>|max-firewall-sessions <10-10000>|
reauthentication <30-86400>|tx-power <0-20>|vlan-cache-ageout
<60-86400>]
wireless-client roam-notification [after-association|after-data-ready|auto]
Parameters
wireless-client [count-per-radio <0-256>|cred-cache-ageout <60-86400>|
hold-time <1-86400>|inactivity-timeout <60-86400>|max-firewall-sessions
<10-10000>|
reauthentication <30-86400>|tx-power <0-20>|vlan-cache-out <60-86400>]
wireless-client roam-notification [after-association|after-data-ready|auto]
Example
rfs7000-37FABE(config-wlan-test)#wireless-client cred-cache-ageout 65
rfs7000-37FABE(config-wlan-test)#wireless-client hold-time 200
rfs7000-37FABE(config-wlan-test)#wireless-client max-firewall-sessions 100
wireless-client Configures the transmit power indicated to wireless clients for transmission
count-per-radio
<0-256> Configures the maximum number of clients allowed on this WLAN per radio
•
<0-256> – Specify a value from 0 - 256.
cred-cache-ageout
<60-86400> Configures the timeout period for which client credentials are cached across associations
•
<60-86400> – Specify a value from 60 - 86400 seconds.
hold-time <1-86400> Configures the time period for which wireless client state information is cached post roaming
•
<1-86400> – Specify a value from 1 - 86400 seconds.
inactivity-timeout
<60-86400> Configures an inactivity timeout period in seconds. If a frame is not received from a wireless client for this
period of time, the client is disassociated.
•
<60-86400> – Specify a value from 60 - 86400 seconds.
max-firewall-sessions
<10-10000> Configures the maximum firewall sessions allowed per client on a WLAN
•
<10-10000> – Specify the maximum number of firewall sessions allowed from
10 - 10000.
reauthentication
<30-86400> Configures periodic reauthentication of associated clients
•
<30-86400> – Specify the client reauthentication interval from 30 - 86400 seconds.
tx-power <0-20> Configures the transmit power indicated to clients
•
<0-20> – Specify a value from 0 - 20 dBm.
vlan-cache-ageout
<60-86400> Configures the timeout period for which client VLAN information is cached across associations.
•
<60-86400> – Specify a value from 60 - 86400 seconds.
wireless-client Configures the transmit power indicated to wireless clients for transmission
roam-notification Configures when a roam notification is transmitted
after-association Transmits a roam notification after a client has associated
after-data-ready Transmits a roam notification after a client is data-ready (after completion of authentication, handshakes
etc.)
auto Transmits a roam notification upon client association (if the client is known to have authenticated to the
network)