Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 115)

98 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
3
This command also enables trustpoint configuration. Trustpoints contain the CA’s identity and
configuration parameters.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
crypto [key|pki]
crypto key [export|generate|import|zeroize]
crypto key export rsa
{background|on|passphrase}
crypto key export rsa
{background {on }|on }
crypto key export rsa
{passphrase {background {on }|on
}}
crypto key generate rsa <1024-2048> {on }
crypto key import rsa
{background|on|passphrase}
crypto key import rsa
{background {on }|on }
crypto key import rsa
{passphrase {background {on }|on
}}
crypto key zeroize rsa {force {on }|on
}
crypto pki [authenticate|export|generate|import|zeroize]
crypto pki authenticate
{background {on }|on }
crypto pki export [request|trustpoint]
crypto pki export request [generate-rsa-key|use-rsa-key]
[autogen-subject-name|subject-name]
crypto pki export request [generate-rsa-key|use-rsa-key]
autogen-subject-name (,email ,fqdn ,
ip-address )
crypto pki export request [generate-rsa-key|use-rsa-key]
autogen-subject-name {background {on }|
on }
crypto pki export request [generate-rsa-key|use-rsa-key]
subject-name
(,email ,fqdn ,
ip-address )]