Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 716)

Brocade Mobility RFS Controller CLI Reference Guide 703
53-1003098-01
7
Example
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#ekahau forward ip
172.16.10.1 port 3
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
description Primary\ radio\ to\ use
channel 1
data-rates b-only
beacon period 50
beacon dtim-period bss 1 5
beacon dtim-period bss 2 2
beacon dtim-period bss 3 5
beacon dtim-period bss 4 5
beacon dtim-period bss 5 5
beacon dtim-period bss 6 5
beacon dtim-period bss 7 5
beacon dtim-period bss 8 5
beacon dtim-period bss 9 5
beacon dtim-period bss 10 5
beacon dtim-period bss 11 5
beacon dtim-period bss 12 5
beacon dtim-period bss 13 5
beacon dtim-period bss 14 5
beacon dtim-period bss 15 5
beacon dtim-period bss 16 5
antenna-gain 12.0
aggregation ampdu tx-only
aeroscout forward
ekahau forward ip 172.16.10.1 port 3
antenna-mode 2x2
--More--
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands:
extended-range
interface-config-radio-instance
Configures the extended range capability for Brocade Mobility 71XX Access Point model devices
Supported in the following platforms:
• Access Point — Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access Point
Syntax:
extended-range <1-25>
Parameters
extended-range <1-25>
no Uses default Ekahau multicast MAC address
extended-range <1-25> Configures extended range on this radio interface from 1 - 25 kilometers. The default is 2 km on 2.4
GHz band and 7 km on 5.0 GHz band.