Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 206)

190 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
The following example shows the captive portal ‘test’ settings after the ‘no’
commands are executed:
rfs7000-37FABE(config-captive-portal-test)#show context
captive-portal test
access-time 35
custom-auth info bob,\ [email protected]
connection-mode https
inactivity-timeout 750
rfs7000-37FABE(config-captive-portal-test)#
Related Commands:
post-authentication-vlan
captive-portal-mode commands
Assigns a post authentication RADIUS VLAN for this captive portal’s users
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
access-time Configures the allowed access time for each captive portal client
access-type Configures captive portal authentication and logging information
accounting Configures captive portal accounting information
bypass Enables bypassing of captive portal detection requests
connection-mode Configures how clients connect to a captive portal
custom-auth Configures the captive portal parameters required for client access
inactivity-timeout Configures the client inactivity timeout interval
logout-fqdn Configures the FQDN address to logout of the session from the client
post-authentication-vlan Assigns a post authentication RADIUS VLAN for this captive portal’s users
radius-vlan-assignment Enables assignment of a RADIUS VLAN for this captive portal
redirection Enables redirection of client connections to specified destination ports
server Configures captive portal server parameters
simultaneous-users Configures the maximum number of clients that can use a single captive portal user name
terms-agreement Configures if a client has to accept terms and conditions before logging to the captive portal
use Associates a AAA policy and DNS whitelist with this captive portal policy
webpage-location Configures the location of Web pages displayed when the user interacts with the captive portal
webpage Configures Web pages used by the captive portal to interact with users
webpage-auto-upload Enables automatic upload of advanced Web pages on a captive portal
aaa-policy Configures a AAA policy
dns-whitelist Configures a DNS whitelist