Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 826)

Brocade Mobility RFS Controller CLI Reference Guide 813
53-1003098-01
7
hostname br7131-4AA708
area RMZEcospace
floor 5thfloor
contact motorolasolutions
country-code us
channel-list 2.4GHz 1,2
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
Related Commands:
geo-coordinates
Device Config Commands
Configures the geographic coordinates for this device. Specifies the exact location of this device in
terms of latitude and longitude coordinates.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
geographic coordinates <-90.0000-90.0000> <-180.0000-180.0000>
Parameters
geographic coordinates <-90.0000-90.0000> <-180.0000-180.0000>
Example
rfs4000-229D58(config-device-00-23-68-22-9D-58)#geo-coordinates -90.0000 166
rfs4000-229D58(config-device-00-23-68-22-9D-58)#
rfs4000-229D58(config-device-00-23-68-22-9D-58)#show context
rfs4000 00-23-68-22-9D-58
use profile default-rfs4000
use rf-domain default
hostname rfs4000-229D58
geo-coordinates -90.0000 166.0000
license AP DEFAULT-6AP-LICENSE
license ADSEC DEFAULT-ADV-SEC-LICENSE
ip default-gateway 192.168.13.2
ip default-gateway priority static-route 20
interface ge1
switchport mode access
switchport access vlan 1
no Removes device’s location floor name
geographic coordinates Configures the geographic coordinates for this device
•
<-90.0000-90.0000> – Specify the device’s latitude coordinate from -90.0000 to 90.0000.
•
<-180.0000-180.0000> – Specify the device’s longitude coordinate from -180.0000 to 180.0000.