Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 977)

966 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
ip-address [|]
Parameters
ip-address [|]
Example
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#ip-address
172.16.10.9
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#show context
static-binding client-identifier test
ip-address 172.16.10.9
client-name RFID
domain-name documentation
bootfile test.txt
default-router 172.16.10.8 172.16.10.9
dns-server 172.16.10.7
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#
Related Commands:
netbios-name-server
static-binding-mode commands
Configures the NetBIOS (WINS) name server’s IP address. This server is used to resolve NetBIOS
host names.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
Configures a fixed IP address (in dotted decimal format) of the client using this host pool
Configures a host alias identifying the fixed IP address of the client using this host pool
A network host alias maps a name to a single network host. For example, ‘alias host $HOST 1.1.1.100’.
In this example the host alias is ‘$HOST’ and it maps to a single host ‘1.1.1.100’. For more information,
see
alias .
no Resets values or disables DHCP pool static binding settings