Netbios-node-type – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 978
Brocade Mobility RFS Controller CLI Reference Guide
967
53-1003098-01
13
netbios-name-server [
Parameters
netbios-name-server [
Example
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#netbios-name-
server 172.16.10.23
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#show context
static-binding client-identifier test
ip-address 172.16.10.9
client-name RFID
domain-name documentation
bootfile test.txt
default-router 172.16.10.8 172.16.10.9
dns-server 172.16.10.7
netbios-name-server 172.16.10.23
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#
Related Commands:
netbios-node-type
Configures different predefined NetBIOS node types. The NetBIOS node defines the way a device
resolves NetBIOS names to IP addresses.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
netbios-node-type [b-node|h-mode|m-node|p-node]
[
Configures the primary NetBIOS server, using one of the following options:
•
•
address
{
}
Optional. Configures the secondary NetBIOS name server, using one of the following options:
•
•
IP address. If the primary NetBIOS name server is unavailable, the secondary server is used.
A network host alias maps a name to a single network host. For example, ‘alias host $HOST 1.1.1.100’.
In this example the host alias is ‘$HOST’ and it maps to a single host ‘1.1.1.100’. For more information,
see
Resets values or disables DHCP pool static binding settings