Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 541)

Brocade Mobility RFS Controller CLI Reference Guide 527
53-1003098-01
6
show wlan {statistics {|detail} {(on >)}
Usage Guidelines:
The customize command enables you to customize the show > wireless command output.
rfs7000-37FABE(config)#customize ?
hostname-column-width Customize hostname column width
show-wireless-client Customize the output of (show
wireless client) command
show-wireless-client-stats Customize the output of (show
wireless client stats) command
show-wireless-client-stats-rf Customize the output of (show
wireless client stats rf)
show-wireless-meshpoint Customize the output of (show
wireless meshpoint) command
show-wireless-meshpoint-neighbor-stats Customize the output of (show
wireless meshpoint neighbor
stats) command
show-wireless-meshpoint-neighbor-stats-rf Customize the output of (show
wireless meshpoint neighbor stats
rf) command
show-wireless-radio Customize the output of (show
wireless radio) command
show-wireless-radio-stats Customize the output of (show
wireless radio stats) command
show-wireless-radio-stats-rf Customize the output of (show
wireless radio stats rf) command
rfs7000-37FABE(config)#
The default setting for the show > wireless > client command is as follows:
rfs7000-37FABE(config)#show wireless client
-----------------------------------------------------------------------------
------------------------------------
MAC IP VENDOR RADIO-ID WLAN
VLAN STATE
-----------------------------------------------------------------------------
----------
-----------------------------------------------------------------------------
----------
Total number of wireless clients displayed: 0
rfs7000-37FABE(config)#
device Optional. Filters WLAN information based on the device name
•
– Specify the device name.
rf-domain
Optional. Filters WLAN information based on the RF Domain
•
– Specify the RF Domain name.
wireless Displays wireless configuration parameters
wlan Displays WLAN related information based on the parameters passed
statistics {|detail} Optional. Displays WLAN statistics. Use additional filters to view specific details
•
– Optional. Displays WLAN statistics. Specify the WLAN name.
•
detail – Optional. Displays detailed WLAN statistics
on
E> The following keyword is common to the ‘WLAN’ and ‘detail’ parameters:
•
on – Optional. Displays WLAN statistics on a specified device or RF
Domain