Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 695)

682 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
no ip address [helper-address |nat]
no ip address dhcp client request options all
no ip ospf
[authentication|authentication-key|bandwidth|cost|message-digest-key|
priority]
Example
The following example shows the VLAN interface settings before the ‘no’
commands are executed:
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan8)#show context
interface vlan8
description This\ VLAN\ interface\ is\ configured\ for\ the\ Sales\ Team
ip address 10.0.0.1/8
ip dhcp client request options all
ip helper-address 172.16.10.3
ip nat inside
crypto map map1
dhcp-relay-incoming
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan8)#
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan8)#no crypto map
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan8)#no description
no ip address Removes or reverts interface IP settings
•
address – Removes IP addresses configured for this interface, depending on the options used while
setting the address
helper-address Disables the forwarding of DHCP and BOOTP packets to the configured helper IP address
•
– Specify the IP address of the DHCP or BOOTP server.
nat Disables NAT for this interface
no ip address Removes or reverts interface IP settings
•
address – Removes IP addresses configured for this interface, depending on the options used while
setting the address
dhcp Removes DHCP client request configured for this interface
client Removes a DHCP client
request Removes DHCP client request
options Removes DHCP client request options
all Removes all DHCP client request options
no ip ospf Removes or reverts interface IP settings
•
ospf – Removes OSPF settings
authentication Removes OSPF authentication scheme
authentication-key Removes the authentication key associated with this layer 3 interface
bandwidth Removes the bandwidth configured for the physical port mapped to this layer 3 interface
cost Removes the OSPF cost configured for this layer 3 interface
message-digest-key
Removes the message digest authentication key identified by the keyword.
priority Removes the OSPF priority configured for this layer 3 interface