Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 480)

466 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show firewall flows stats on rfs7000-37FABE
Active Flows 2
TCP flows 1
UDP flows 0
DHCP flows 1
ICMP flows 0
IPsec flows 0
L3/Unknown flows 0
rfs7000-37FABE(config)#
global
show commands
Displays global information for network devices based on the parameters passed
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show global [device-list|domain]
show global device-list {filter {offline|online|rf-domain}}
show global device-list {filter {offline|online}}
show global device-list {filter rf-domain [|not ]}
show global domain managers
Parameters
show global device-list filter {offline|online}
global device-list Displays global information for all network devices. Use the following keywords to specify additional filters:
offline, online, and rf-domain.
filter {offline|online} Optional. Specifies additional filters
•
offline – Optional. Displays global information for offline devices only
•
online – Optional. Displays global information for online devices only