Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 67)

Brocade Mobility RFS Controller CLI Reference Guide 49
53-1003098-01
2
status Status of Device Upgrade
versions Versions of device-upgrade images
rfs4000-229D58>show device-upgrade
rfs4000-229D58>show device-upgrade history
-----------------------------------------------------------------------------
--------------------
Device RESULT TIME RETRIES UPGRADED-BY
LAST-UPDATE-ERROR
-----------------------------------------------------------------------------
--------------------
br71xx-0F43D8 failed 2013-01-05 00:21:08 3 00-23-68-22-9D-58
Update error: Unable to get update file, failure in ftp/openssl/tar
ap6532-986C50 failed 2013-01-05 00:26:31 3 00-23-68-22-9D-58
Update error: Bad file, failure in tar. tar: invalid tar magic
Total number of entries displayed: 2
rfs4000-229D58>
rfs4000-229D58>show device-upgrade versions
-----------------------------------------------------------------------------
---
CONTROLLER DEVICE-TYPE VERSION
-----------------------------------------------------------------------------
---
rfs4000-229D58 br650 5.5.0.0-042B
rfs4000-229D58 br6511 none
rfs4000-229D58 br1220 5.5.0.0-042B
rfs4000-229D58 br71xx none
rfs4000-229D58 br81xx none
rfs4000-229D58 rfs4000 none
-----------------------------------------------------------------------------
---
rfs4000-229D58>
disable
User Exec Commands
This command can be executed in the Priv Exec Mode only. This command turns off (disables) the
privileged mode command set and returns to the User Executable Mode. The prompt changes from
rfs7000-37FABE# to rfs7000-37FABE>
.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
disable