Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 734)

Brocade Mobility RFS Controller CLI Reference Guide 721
53-1003098-01
7
rfs4000-229D58(config-device-00-23-68-22-9D-587-if-radio1)#
rfs4000-229D58(config-device-00-23-68-22-9D-587-if-radio1)#radio-resource-mea
surement max-entries 10
rfs4000-229D58(config-device-00-23-68-22-9D-587-if-radio1)#
rfs4000-229D58(config-device-00-23-68-22-9D-587-if-radio1)#show context
interface radio1
radio-resource-measurement max-entries 10
radio-resource-measurement attenuation-threshold 20
rfs4000-229D58(config-device-00-23-68-22-9D-587-if-radio1)#
Related Commands:
radio-share-mode
interface-config-radio-instance
Configures a radio’s mode of operation as Radio Share. A radio operating in the Radio Share mode
services clients and also performs sensor functions (defined by the radio’s AirDefense Services
Platform (ADSP) licenses and profiles).
NOTE
The sensor capabilities of the radio are restricted to the channel and WLANs defined on the radio.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
Syntax:
radio-share-mode [inline|off|promiscuous]
Parameters
radio-share-mode [inline|off|promiscuous]
Example
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#radio-share-mode
promiscuous
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
power 12
data-rates b-only
placement outdoor
no Disables 802.11k radio resource measurement support
radio-share-mode Configures the Radio Share mode of operation. The options are: inline, off, and promiscuous
inline Enables sharing of all WLAN packets (matching the BSSID of the radio) serviced by the radio. In the inline
mode, all packets are shared with the WIPS sensor module.
off Disables Radio Share (no packets shared with WIPS sensor module)
promiscuous Enables the sharing of packets received in the promiscuous mode (i.e. without filtering based on BSSI). In
the promiscuous mode, the radio captures every frame it sees on the channel it is set for.